How To Wash Graco Extend2fit Car Seat Cover

To help you go the most out of your Graco Extend2Fit car seat, we've put together this Graco Extend2Fit tutorial. On this page you lot'll find help with:

Best Graco Extend2Fit car seat tutorials on YouTube (to acquire how to employ your Extend2Fit machine seat quickly)
Installation questions
Common usage questions/bug
Questions on removing machine seat parts
Questions on cleaning your Extend2Fit car seat

And (as they say in infomercials) much, much more than!

Graco Extend2Fit Car Seat Tutorial YouTube

Hither are the best YouTube videos we could detect to help y'all learn to use your Graco Extend2Fit motorcar seat:

Babylist has a groovy video that reviews the Graco Extend2Fit car seat:

Pania Thong has an first-class 24-minute video that shows the features and installation of the Graco Extend2Fit car seat:

Billie Grant has a groovy tutorial that shows you how to put washed cushions and paddings on the Graco Extend2Fit auto seat likewise as how to arrange the harness straps:

Installation Questions

How to install the Graco Extend2Fit car seat using LATCH arrangement rear-facing

To install rear-facing using the LATCH system on the Graco Extend2Fit motorcar seat, please follow the steps beneath. You may wish to watch this video to see a sit-in.

i
Adhere the top tether claw to the plastic bar on the right side of the automobile seat (please see prototype below taken from the Didactics Manual).

2
Push in on the red buttons on the LATCH connectors and remove them from storage location (please encounter image below taken from the Instruction Transmission).

3
Ensure the LATCH strap is in the rear-facing belt path (marked with a blue label).
4
Recline the car seat by pulling on the handle at the front end of the kid constraint, so that the automobile seat is in recline position 1, 2, three or 4.
five
Place the auto seat rear-facing in the vehicle'south back seat. Its base should sit as flat as possible on the vehicle seat. Ensure at least eighty% of the base is on the vehicle seat.
6
Squeeze the adjustment handle and pull the extender out to have boosted leg room (please see epitome below taken from the Instruction Manual). Utilize position 2, 3 or 4 of the extender if your child is above 18 kg.

7
Accommodate the seat until the ball is completely in the blue zone in the Level Indicator. Your vehicle must be on level ground when you lot cheque the indicator. The ball must completely cover the calorie-free blue circle if your child is beneath 3 months erstwhile.
8
Extend the LATCH strap to its maximum length.
9
Connect LATCH connectors to the vehicle'southward lower LATCH anchors (please see images below taken from the Instruction Manual). Ensure the strap is not twisted.

ten
Press downwards firmly at the center of the auto seat and tighten the LATCH strap (please come across prototype below taken from the Instruction Manual). Yous may need to tighten through the slit in the pad at the belt path.

xi
Grab the sides of the car seat and slide it side-to-side and front-to-back to exam for tightness. The car seat should motion less than ii.5 cm.
12
Cheque the Level Indicator again to ensure the ball is completely within the blue zone. The ball must completely cover the light blue circumvolve if your kid is below 3 months old. Readjust the car seat or place rolled towels under the car seat at the vehicle seat pucker if needed.

How to install Graco Extend2Fit machine seat rear-facing with seat chugalug

To install rear-facing using the seat chugalug on the Graco Extend2Fit car seat, please follow the steps below. You may wish to watch this video to see a demonstration.

1
Adhere the height tether hook and the LATCH connectors to the plastic bars (please see images beneath taken from the Teaching Manual).

two
Recline the car seat by pulling on the handle at the front of the child constraint, and then that the car seat is in recline position ane, 2, iii or 4.
three
Place the machine seat rear-facing in the vehicle's back seat. Its base of operations should sit as flat as possible on the vehicle seat. Ensure at to the lowest degree 80% of the base is on the vehicle seat.
iv
Squeeze the aligning handle and pull the extender out to have additional leg room (please meet epitome below taken from the Instruction Transmission). Utilize position two, 3 or four of the extender if your kid is to a higher place 18 kg.

five
Adjust the seat until the ball is completely in the blue zone in the Level Indicator. Your vehicle must be on level ground when you lot check the indicator. The ball must completely cover the light blue circumvolve if your child is beneath iii months old.
6
Route the vehicle seat belt through the rear-facing belt path that is marked with a blue label (please see image below taken from the Instruction Manual).

7
Ensure the strap is not twisted. The vehicle seat belt must be in forepart of the buckle strap (please see image below taken from the Education Manual).

8
Lock the vehicle seat belt past slowly pulling the shoulder belt all the way out and letting information technology become. After hearing a clicking audio, slowly pull the belt to ensure it is locked.
9
Press down firmly at the centre of the car seat and pull on the shoulder belt to tighten while feeding the slack back I the retractor (delight see epitome below taken from the Instruction Manual).

10
Grab the sides of the car seat and slide information technology side-to-side and forepart-to-back to test for tightness. The car seat should movement less than 2.5 cm.
11
Check the Level Indicator once again to ensure the brawl is completely within the blue zone. The ball must completely encompass the light blue circle if your child is beneath three months quondam. Readjust the car seat or identify rolled towels under the car seat at the vehicle seat crease if needed.

How to install Graco Extend2Fit car seat frontwards-facing

You can install forward-facing using Graco Extend2Fit auto seat with either the LATCH strap or vehicle seat belt.

To install forrad-facing using the LATCH strap, please follow the steps below.

i
Push button in on the cherry buttons on the LATCH connectors and remove them from storage location (delight see image below taken from the Teaching Manual).

ii
Ensure the LATCH strap is in the forward-facing chugalug path (marked with an orange characterization).
3
Unhook the tiptop tether strap and lay information technology in the seat (please meet image below taken from the Instruction Manual).

4
Recline the machine seat by pulling on the handle at the forepart of the child constraint, so that the auto seat is in recline position 4, 5 or 6. Children of 10-eighteen kg must use position 4, while children above 18.1 kg must use position 5 or 6.
5
Place the car seat forrad-facing in the vehicle's back seat. Its base of operations should sit down as flat as possible on the vehicle seat. Ensure at to the lowest degree 80% of the base is on the vehicle seat.
6
Extend the LATCH strap to its maximum length.
7
Connect LATCH connectors to the vehicle's lower LATCH anchors (delight see images beneath taken from the Didactics Manual). Ensure the strap is not twisted.

viii
Printing down firmly at the heart of the car seat and tighten the LATCH strap (please meet image below taken from the Pedagogy Manual).

9
Adhere the peak tether strap and tighten it (please meet images below taken from the Didactics Manual).

10
Take hold of the sides of the automobile seat and slide it side-to-side and front end-to-back to test for tightness. The car seat should motion less than 2.v cm.

To install frontward-facing using the vehicle seat chugalug, please follow the steps beneath. Y'all may wish to scout this video to meet a sit-in.

1
Attach the LATCH connectors to the plastic confined (please run into image below taken from the Instruction Manual).

2
Recline the motorcar seat by pulling on the handle at the front of the child constraint, so that the automobile seat is in recline position iv, 5 or 6. Children of 10-18 kg must use position four, while children above xviii.i kg must use position v or half-dozen.
3
Unhook top tether and lay it in the seat (please see image below taken from the Instruction Manual).

4
Identify the motorcar seat forward-facing in the vehicle's back seat. Its base should sit down as flat equally possible on the vehicle seat. Ensure at least eighty% of the base of operations is on the vehicle seat.
v
Road the vehicle seat belt through the forward-facing belt path that is marked with an orangish label (please see image below taken from the Instruction Transmission). Buckle the seat belt. Ensure that it is non twisted.

6
Lock the vehicle seat belt by slowly pulling the shoulder belt all the way out and letting it become. After hearing a clicking sound, slowly pull the belt to ensure it is locked.
seven
Printing down firmly at the center of the automobile seat and pull on the shoulder belt to tighten while feeding the slack dorsum in the retractor (please run into image below taken from the Instruction Manual).

eight
Adhere the top tether strap and tighten information technology (delight see images below taken from the Instruction Manual).

9
Catch the sides of the car seat and slide it side-to-side and front end-to-back to test for tightness. The car seat should motion less than 2.5 cm.

Why can't y'all use both LATCH strap and seat belt for Graco baby Extend2Fit motorcar seat?

The Graco Extend2Fit auto seat is designed to withstand crash forces in specific ways, such equally with the LATCH strap only or with the seat belt only. When both the LATCH strap and seat belt are placed through the same belt path, crash forces could exist exerted on the machine seat shell from unlike angles, thus causing breakage. Therefore, both the LATCH strap and seat belt should not be used at the same time.

How should a Graco Extend2Fit motorcar seat sit?

The base of the Graco Extend2Fit automobile seat should sit as apartment equally possible on the vehicle seat. There should be at least 80% of the base on the vehicle seat.

Common Usage Questions & Problems Related to Graco Extend2Fit Auto Seat

What is the height limit on Graco Extend2Fit motorcar seat?

The tiptop limit for forward-facing on the Graco Extend2Fit car seat is 125 cm. When in the booster mode, the elevation limit is 145 cm.

What is the maximum meridian for Graco Extend2Fit car seat rear-facing?

There is no height limit for rear-facing on the Graco Extend2Fit automobile seat as long as your child is below 22.5 kg (fifty lb).

How long tin you rear face in Graco Extend2Fit auto seat?

Your child tin rear confront in the Graco Extend2Fit machine seat until he/she weights more than 22.5 kg (50 lb).

When to adapt to forrard-facing in Graco Extend2Fit car seat

To conform to forward-facing using a Graco Extend2Fit motorcar seat, your kid must be 10-30 kg. Please note that your child can be frontward-facing only if he/she can sit down upright unassisted.

How to tighten Graco Extend2Fit motorcar seat when it moves effectually?

When installing using the LATCH strap, please press down firmly at the middle of the car seat and tighten the strap. Y'all may watch this video for a sit-in.
When installing using the vehicle seat chugalug, delight press down firmly at the center of the car seat and pull on the shoulder belt to tighten while feeding the slack dorsum in the retractor. You may watch this video for a demonstration.

When does a Graco Extend2Fit car seat demand to be replaced in an accident?

Please supersede your Graco Extend2Fit automobile seat after an accident. Even a minor crash can crusade unseen damage to the car seat. Using the motorcar seat over again may upshot in injury or expiry.

How to adjust/extend the crotch strap or buckle chugalug on the Graco Extend2Fit motorcar seat

To adjust/extend the crotch strap or buckle belt on the Graco Extend2Fit car seat, delight follow the steps below. The images beneath are taken from the Instruction Manual).

1
Recline the car seat and find the metal servant under the car seat shell.

ii
Rotate the metallic retainer and insert it upwards through the trounce and pad.
3
Pull the crotch buckle out from the top of the car seat.

four
Insert the metallic retainer in the new slot. Pull the metallic retainer through from the underneath of the car seat.

v
Pull on the crotch strap to ensure information technology is secured.

How to adapt shoulder straps on Graco Extend2Fit car seat

To loosen the straps of the Graco Extend2Fit car seat, lift up the harness release lever and pull out on the straps above the chest clip simultaneously (delight run into prototype beneath taken from the Educational activity Manual). You may wish to watch this video for a demonstration.

To tighten the straps, pull the harness adjustment strap (please meet image below taken from theInstruction Transmission). You may wish to lookoutthis video for a sit-in.

When to extend legs on Graco Extend2Fit car seat

You lot may extend the leg room according to the demand of your child by squeezing the adjustment handle and pulling out the extender. If your child is above eighteen kg, please use position ii, iii or 4 (kindly see the prototype below taken from the Instruction Manual).

How to move upwardly the shoulder straps in Graco Extend2Fit car seat

To move upwards the shoulder straps in the Graco Extend2Fit auto seat, delight clasp the adjustment handle and move the headrest up. Yous may picket this video for a demonstration.

How to untwist Graco Extend2Fit automobile seat strap

You may sentinel this video and this video for tips and a demonstration on how to untwist the Graco Extend2Fit automobile seat strap.

When to buy booster for Graco Extend2Fit car seat

You volition demand to purchase booster for the Graco Extend2Fit car seat when your child is above 30 kg and 125 cm.

Which recline setting do I utilise on a Graco Extend2Fit car seat?

On a Graco Extend2Fit machine seat, please suit the car seat to be in recline position 1, two, three or 4 for rear-facing, or in recline position 4, 5 or 6 for forward-facing. For booster utilize, the car seat should be in recline position six.

Can Graco Extend2Fit automobile seat connect to Graco stroller?

To connect a Graco automobile seat to stroller, you may consider models that have the Click Connect engineering such as the Graco SnugRide SnugLock Extend2Fit 35 car seat.

Questions on Removing Graco Extend2Fit Motorcar Seat Parts

When to remove body support or paddling from Graco Extend2Fit auto seat

You may remove the body support or paddling from the Graco Extend2Fit motorcar seat when your baby no longer needs it. If your baby's shoulders are above the lowest harness setting without the body support, you lot may remove it.

Can you remove cushions from a Graco Extend2Fit car seat?

Yous tin can remove the cushions or body back up from the Graco Extend2Fit car seat when your babe's shoulders are above the lowest harness setting.

How to remove cup holder from Graco Extend2Fit car seat

To remove the loving cup holders from the Graco Extend2Fit car seat, please push the bottom of the holder upwards.

How to remove LATCH strap on Graco Extend2Fit car seat

To remove the LATCH strap on the Graco Extend2Fit motorcar seat, please button in on the reddish buttons on the connectors and pull them off. The image beneath is taken from the Instruction Transmission.

Questions on Cleaning Graco Extend2Fit Car Seat

How to wash a Graco Extend2Fit car seat and take off covers

Beneath are some great tutorials that bear witness yous how to:

Clean the harness straps and LATCH straps

Clean the buckle

Remove and supercede the car seat encompass

Please see below for some detailed step-by-step instructions to launder different parts of the Graco Extend2Fit car seat:

Surface wash the harness straps and LATCH straps with mild lather and damp cloth simply.

Surface wash the harness straps and LATCH straps with balmy lather and damp cloth but.

Clean plastic pieces such as cup holders and motorcar seat handles using a microfiber cloth and a spray of water or mild soap.

Clean the crotch buckle by following the steps below.

1
Recline the auto seat and find the metallic retainer. Rotate the metallic servant up through the trounce and pad (please see image below taken from the Education Manual).

two
Pull out the buckle from the front.
iii
Place the buckle in a cup of warm water and gently agitate the buckle (delight see image below taken from theEducational activity Manual).

Exercise not immerse the straps in h2o equally doing so tin weaken them.
Practice not utilize soaps, household detergents or lubricants.

4
Press the red push several times.
v
Shake out excess h2o and permit to air dry (delight see prototype below taken from the Instruction Transmission).

6
Place the buckle back to the machine seat. Pull on information technology to ensure information technology is secured.

6
Place the buckle back to the motorcar seat. Pull on information technology to ensure information technology is secured.

Clean the covers of the seat pad, rear pad, front pad and caput back up with a clammy sponge using mild soap and water. If needed, you may remove them and machine wash in cold water on delicate wheel and drip-dry. Do not use bleach. To remove each cover, delight follow the steps below.

Seat pad (please refer to images taken from the Instruction Manual):

1
Loosen the harness straps and extend the headrest to its tallest position.
2
Unbuckle the chest prune and the buckle strap.

three
Remove the belt straps from the splitter plate at the back of the car seat. Pull the straps through the front of the pad.

4
Undo the elastic straps at the back of the seat as well equally at the sides of the seat.

5
Remove the cover from the shell.
6
When putting the cover back on, ensure to rethread the harness straps over the metal bar. The straps must non be twisted.

Rear pad (please refer to paradigm taken from the Pedagogy Manual):

Disengage the rubberband loops and remove the rear pad.

one
Undo the elastic loops plant on peak of the front pad.
two
Undo the pins past pulling the pad away from the seat.

Head support (please refer to images taken from the Instruction Manual):

3
Undo the rubberband loop found underneath the caput support embrace. Pull the tab out from behind the head back up.

iv
Disengage the rubberband loops on the sides of the head support.

5
Remove the comprehend from the head support.

Where do the hooks latch on Graco Extend2Fit car seat comprehend?

On the Graco Extend2Fit car seat cover, the hooks latch on the head support cover equally well as on the sides of the headrest. The hooks too latch on the rear and front pads.

How to unhook the bottom of Graco Extend2Fit car seat cover

To unhook the bottom of the Graco Extend2Fit motorcar seat encompass, please undo the elastic straps from the sides of the car seat (please see paradigm below taken from the Didactics Transmission).

Yous may likewise sentinel this video for a demonstration.

How to take cover off Graco Extend2Fit car seat and put the cover back on after washing

You may scout this video to meet a sit-in on taking the cover off the Graco Extend2Fit car seat and put it back on.

Graco Extend2Fit Convertible Car Seat featuring Safe Environs Side Impact Protection

Source: https://safeconvertiblecarseats.com/brands/graco/extend2fit-car-seat-tutorial/